 |
(Click on photos to enlarge)
|
slisen.blogspot.com
Have you ever knit something that soon became one of
your favorite ‘go-to’ patterns? This
slipper is one of those. I don’t even
remember where I got the original pattern from but it’s been around for a long, long
time. The original didn’t have a cuff
but everyone likes the cuff so well that it’s all I knit anymore. The fairisle floats make a nice double
layered fabric for warmth and a longer wearing sole.
They can be made on any machine and with any yarn
but easiest knit with a punch card or electronic machine. However they can be made on a manual machine by pulling needles. Refer to your machine user's manual for instructions.
My pattern is designed for a woman’s size 8 or
thereabouts, and knit on a bulky machine with worsted weight acrylic
yarns. I’ve made many pair for the
grandkiddies on my midgauge machine with a lighter weight worsted, such as
Caron Simply Soft. Imagine how nice
they’d be made with a superwash wool or wool blend. If you know the approximate foot length, you
can make a pair of these slippers to fit any foot. They don’t need the precise fit that socks
require so they’re somewhat size forgiving.
Use your imagination and combine some crazy yarns
for a colorful slipper. Or use colors of your favorite sports team. (Note the pair with the Green Bay Packers green and gold.)
FAIRISLE
SLIPPERS
Fits size 8 Woman’s (for approximately a 10” long foot)
Machine:
Bulky with ribber
Yarn: Any
worsted (4 oz main color, 2 oz contrasting color)
Gauge:
Unimportant
1. T4,
with WY and ravel cord, CO 44 sts (multiples of 6 + 2 to keep in checkerboard
pattern)
2. e-wrap
(with 1 yarn).
3. K1R
across.
4. RC 000,
set fairisle card for patterning.
Note: Pull
out end needle on carriage side each row to catch the floats.
5. K48R.
6. Take machine off Fairisle and return to
Stockinette.
7. Cut CC
yarn and K1R.
8.
Transfer EOS to its neighbor and move stitches together.
9. K2R.
10. Gather up toe and secure, mattress stitch
front seam. Leave 4” opening (5 blocks
of color).
11. If not adding ribbed cuff, sew back and heel
together. If adding ribbed cuff, do not
sew up back and heel until after the cuff is knit.
TO ADD
RIBBED CUFF:
1. Hang
top edge of slipper, with wrong side facing.
Pick up both loops of 46 stitches.
2. K1R
from L to R. (T4 on SK860).
3.
Transfer EOS to main ribber bed.
4. T0, Work
1x1 rib for 29 rows. (35R at T5 on
SK860)
5.
Transfer ribber stitches to main bed.
Back stitch bind off.
6. Seam
ribbing with a Bickford st from the wrong side.
From the inside, blanket st thru both loops of both layers on the back
and heel by forming a ‘T’ shape for heel.
There is a very good foot size chart at http://www.junebugsplace.com/socksizes.htm to give you a starting point for sizes other than my
pattern.
Kids’ feet are as unique and as varied as
adult’s. Some are narrow, some are
chubby so it’s quite hard to declare a standard size. But below is what I knit for some of our
grandkids a few years ago, all with different configuration of feet. These were knit with one strand of worsted
weight yarn and one strand of Caron Simply Soft (a lighter worsted). The ribbing was knit at T4 with Caron Simply
Soft on my midgauge SK860 machine and ribber.
Sz CO # of Rows Sts to P/U #
of Rows
For
Ribbing
9” 42 43 45 35
8” 37 40 39 31
7” 32 32 35 27
5” 29 26 29 23
NOTE: To seam the back into a ‘T’ shape, I start
from the top of the back and with a blanket stitch, seam the back edges
together to within about 2/3 of the way toward the heel. You can adjust the height of the back heel by
leaving a bigger or smaller open area here.
Then I ‘flatten’ the remaining fabric from the middle of the fold,
pushing it toward the seam to make a ‘T’.
Then I catch the middle stitch at the fold line and secure it to the
already sewn seam with a blanket stitch just for a bit of added stability. Then blanket stitch toward one end of the
heel and fasten off. Don’t cut the yarn
but invisibly run it thru the seam already done toward the other heel end. When you get to the middle blanket stitch,
again close the other end of the heel with a blanket stitch. Fasten off and hide yarn tail. This picture shows the seam, in a different pair of slippers, but it'll give you a good idea how the 'T' is formed.
