Saturday, November 10, 2012

Midgauge Socks in the Round

(Click on photos to enlarge)
slisen.blogspot.com
Machine:  SK860 Midgauge with ribber
Yarn:  Berroco Vintage Colors, 1 skein
            50% acrylic, 40% wool, 10% nylon
            Machine Washable, 217 yds per 3.5 oz
Tension:  T5
Gauge:  5.5 sts and 8 rows = 1”
Size:  Woman’s 8

Socks made in the round but may be made flat and seamed

Divide skein of yarn in half, either by weight or yardage

CUFF: 
1)  Double bed e-wrap 44 sts in 1 x 1 (or desired) rib.  K1R to left and hang CO comb and ribber weights.
2)   RC000, T2/2 K20R.
3)   For a seam up the back of the ribbing, transfer main bed stitches to the ribber bed.
4)   T6, K1R across.
5)   Lower ribber and remove CO comb and ribber weights.  Hang 4 claw weights evenly across.
6)   Transfer the right hand 11 stitches to corresponding needles from ‘0’ to R11 on the main bed.
7)   Transfer the left hand 11 stitches to corresponding needles from ‘0’ to L11 on the main bed.
8)   Unravel the row of stitches on the carriage side to have yarn in proper knitting position.
NOTES:  If a side seam in the ribbing is desired, transfer half the stitches opposite the carriage to corresponding needles on the main bed.
      Transferring stitches may be accomplished by scrapping off stitches to be moved with several rows of waste yarn and rehanging to the main bed or by using a garter bar or Decker type tool (comb). 

ANKLE:
1)   RC000, T5/6, raise ribber and set machine for circular knitting and K50R.

HEEL:
1)   Lower ribber bed one notch.  On the main bed and with main bed carriage, shortrow the heel down to 8 sts and back out til all needles are in working position.
2)   Transfer purl bumps from the main bed to the ribber bed at each side to prevent holes.

FOOT:
1)   RC000, raise ribber and return carriage and all settings to circular knitting and K88R.

TOE:
1)   Repeat shortrowing as for heel but decrease down to 6 sts instead of 8.  No need to transfer the purl bumps on each side.
2)    Cut yarn, leaving enough to graft the toe seam.
3)    Scrap off stitches on each bed with several rows of waste yarn and remove from machine.

FINISHING:
1)   Seam ribbing.
2)   Graft the toe seam.

NOTES:
1)   For a longer sock, use contrasting yarn for the heel/toes to allow for adding more rows in the ribbed cuff and/or ankle.

2)   I use a strand of Wooly Nylon run through its own tensioner in the heels and toes for added body and reinforcement for longer wear.  If not using Wooly Nylon, I reduce the tension in just the heel and toe by one full number.

3)   Be sure to swatch yarn as gauge may vary with different colorways even in the same brand.

4)   Ribber tensions usually run differently than main bed tensions, so always run a test swatch and set ribber tension to match the main bed gauge while knitting in the round.

3 comments:

  1. Are those at the top the ones you made me? I have to say I love them to bits. So cozy now that the weather has turned cold. Thanks again for making them for me!

    ReplyDelete
    Replies
    1. Yup, they are. And you're very welcome. I just made myself a pair and I really like them too. Nice in my Crocs.

      Delete
  2. Thank you so much. I hope it's helpful.

    ReplyDelete